loading
| Availability: | |
|---|---|
| Number of robotic axes：7 axes | Nominal Voltage：220V/50Hz |
| Power capacity：8.0 KVA | Power：7.5kw |
| Maximum load：15 kg | Nominal Current：40A |
| Maximum operating range：1500 mm | Equipment air pressure：0.5-0.7 MPa |
| Weight：147 kg | Piping diameter：400 mm |
| Repeatability：±0.03 | Total weight of the workstation：1.7 tons |
| Protective rating：IP64/IP67 | Overall dimensions of the workstation：Length 3750 × Width 2430 × Height 2930 mm |
| Power capacity：Φ8 | 12-hour Output: 1728 pcs (partial spraying) 1136 pcs (full-length spraying |
The biggest advantage of non programming spraying robots is that they are easy to operate and do not require professional programming knowledge.
The non programming spraying robot is equipped with an advanced control system, which can achieve precise spraying operations.
During the production process, if it is necessary to adjust the spraying parameters or paths, the operator can drag and teach again without the need for computer programming. This flexibility enables programmable spray painting robots to quickly adapt to changes in production needs.
Due to its easy operation, it reduces equipment failures caused by improper handling. At the same time, its control system and mechanical structure have been optimized and designed to have high stability and reliability, with a low failure rate。
The robot achieves automated operation, reduces manual intervention, lowers safety risks caused by human error, and creates a safer working environment for workers.
content is empty!
